1. Light inspection – visually inspect for non-working lights.
2. Inspect oil before service-verify if vehicle consumes oil between changes.
3. Check power steering fluid level.
4. Check brake fluid level-if level is low, we do not add.
5. Fill the windshield washer fluid.
6. Check tire pressure and set accordingly.
7. Check automatic transmission fluid level and inspect fluid color.
8. Check coolant protection level-topping off is a nominal fee.
9. Check radiator and hoses for leaks or cracks.
10. Inspect belt for cracking, fraying or other wearing.
11. Visually inspect air filter.
12. Visually inspect breather filter.
13. Visually inspect P.C.V. valve.
14. Visually inspect fuel filter and lines for signs of age and rust.
15. Inform customer of the use of fuel system services.
16. Visually inspect wiper for tear and ask customer about performance.
17. Visually inspect cabin air filter.
18. Grease all lubrication points on the suspension.
19. Replace engine’s motor oil.
20. Replace engine oil filter.
21. Wash the windshield.
22. Inspect tires for unusual wear.
23. Inspect vehicle for any visible signs of fluid leaks.
24. Review all the checkpoint items with the customer.
    
    These items done per customer’s request, due to time constraints, these checks may also not be possible on some vehicles.
    
25. Check rear differential fluid level.
26. Check front differential fluid level.
27. Check transfer case fluid level.
28. Check manual transmission fluid level.

Note – not all checks are applicable to all vehicles.